View NUF6107MNTBG_4132339.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NUF6107MN 4 Channel Data Line EMI Filter with 2 Channel USB Filter and ESD Protection
This device is a four-channel EMI filter array for data lines. Greater than -35 dB attenuation is obtained at frequencies from 800 MHz to 2.2 GHz. It also offers USB filtering circuitry with speed detection. This includes the inline resistors for impedance matching and EMI filtering. ESD protection is provided across all capacitors.
Features http://onsemi.com
1 R1 12 C1 2 R2 C2 3 D3 C3 R3 D2 10 C4 D4 9 C6 R5 D7 C7 R6 6 D9 C9 C10 D10 C8 D8 7 D6 8 D1 11
* * * * * * * * * * * *
EMI Filtering and ESD Protection for Data Lines USB 1.1 and 2.0 Full Speed Filtering Provided Integration of 26 Discretes Offers Cost and Space Savings Low Profile DFN, Packaging, 3.0 x 1.35 mm MSL 1 Compliant with IEC61000-4-2 (Level 4) > 8 kV Contact on all outputs and data lines This is a Pb-Free Device EMI and USB Filtering and ESD Protection for Data Lines Cell Phones Handheld Portables Notebook Computers MP3 Players
1 2 3 4 5 6
4 D5 5 C5
R4
Typical Applications
(Top View)
MARKING DIAGRAM
1
GND
12 1
DFN12 CASE 506AD
61 07 MG G
12
11
10 9 8 (Bottom View)
7 6107= Specific Device Code M = Month G = Pb-Free Package (Note: Microdot may be in either location)
Figure 1. Pin Connections
ORDERING INFORMATION
Device NUF6107MNTBG Package DFN12 (Pb-Free) Shipping 3000 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
(c) Semiconductor Components Industries, LLC, 2007
1
December, 2007 - Rev. 1
Publication Order Number: NUF6107MN/D
NUF6107MN
MAXIMUM RATINGS
Parameter ESD Discharge IEC61000-4-2 pins 1 to 10 pins 11 to 12 Operating Temperature Range Storage Temperature Range Maximum Lead Temperature for Soldering Purposes (1.8 in from case for 10 seconds) Contact Discharge Symbol VPP 2.0 8.0 TOP TSTG TL -40 to 85 -55 to 150 260 C C C Value Unit kV
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted)
Parameter Maximum Reverse Working Voltage Breakdown Voltage Leakage Current EMI Filter Resistors USB Resistors; Impedance Matching Diode Capacitance Diode Capacitance Symbol VRWM VBR IR R3 - R6 R1, R2 C3 - C10 C1, C2 VR = 2.5 V VR = 2.5 V IR = 1.0 mA VRWM = 3.3 V per line Test Conditions Min 6.0 80 18 24 29 Typ 6.8 100 22 30 36 Max 5.0 8.0 0.1 120 26 36 43 Unit V V mA W W pF pF
http://onsemi.com
2
NUF6107MN
PACKAGE DIMENSIONS
DFN12 3.0x1.35, 0.5P CASE 506AD-01 ISSUE G
2X
0.15 C A B D (A3)
NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.25 AND 0.30 MM FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. 5. EXPOSED PADS CONNECTED TO DIE FLAG. USED AS TEST CONTACTS. MILLIMETERS MIN MAX 0.80 1.00 0.00 0.05 0.20 REF 0.18 0.30 3.00 BSC 2.10 2.30 1.35 BSC 0.20 0.40 0.50 BSC 0.20 --0.20 0.40
E
2X
0.15 C
PIN ONE REFERENCE
TOP VIEW
EXPOSED Cu
0.10 C
12 X
(A3) A
0.08 C
2X 0.2 X 0.25 MM NOTE 5 12 X
SIDE VIEW A1 D2
1
SEATING PLANE
C
DIM A A1 A3 b D D2 E E2 e K L
L
e
EXPOSED PAD 6
SOLDERING FOOTPRINT*
2.352 0.093 0.351 0.014
E2
12 X K
12
7 12 X
b 0.10 C A B 0.05 C
NOTE 3
BOTTOM VIEW
0.265 0.01
0.479 0.019
SCALE 16:1 mm inches
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
3
NUF6107MN/D

▲Up To Search▲

Price & Availability of NUF6107MNTBG

	To Download NUF6107MNTBG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .